This article explains the changes for the 2027 tax year.
Rate changes 2027
As part of the year-end process, review and configure rate changes for the new tax year.
Preloaded rates
We preload the following rate changes as part of the year end software update:
Pay As You Earn (PAYE)
Pay Related Social Insurance (PRSI)
Universal Social Charge (USC)
Statutory Sick Pay (SSP) Entitlement Days
Additional Superannuation Contribution (ASC)
To review these rates, check preloaded 2027 rates.
Customer configurable rates
You need to configure the following rates manually:
OAP rates
Social Welfare Rates
National Minimum Wage
For more details on these rate changes, refer to the year end checklist article and Government website.
Software changes 2027
During your year end process, review the following software changes.
SSP entitlement days
Statutory sick pay (SSP) entitlement stays at five days per calendar year in 2027.
The Sick Leave Act 2022 originally planned to increase this entitlement in phases. The government has postponed those increases and will review the position further.
AEPN and AEL software changes
NAERSA has decided not to proceed with its planned software changes to AEPNs. These changes covered AEL breach scenarios, outdated AEPN warnings and AEPN tax year changes.
NAERSA has confirmed that no planned technical developments will affect payroll integration.
AEPNs stay calendar-date driven. They don't reset for AEL breaches until 1 January 2027, even if you run the January 2027 payroll in December 2026.
What this means for you
This release includes no AEPN or AEL software changes, and NAERSA has confirmed that no planned developments will affect payroll.
If NAERSA identifies your organisation as having employees in an AEL breach position at the end of 2026, NAERSA will contact you. Follow any actions it advises.
Inadequate pay auto-enrolment (INPA) changes
Previously, PeopleXD recouped any auto-enrolment shortfall from the employee in later pay periods. This matched the approach set out at workshops with the Department of Social Protection and the PSDA.
The legislation makes the employer responsible for a shortfall when an employee's pay doesn't cover their contribution. The employer funds the balance, and the employee repays the employer in a later pay period.
PeopleXD now follows the legislation. When net pay can't cover an employee's auto-enrolment contribution, PeopleXD records the balance as an employer-funded underpayment and recovers it from the employee later.
Review the summary below, then complete the setup steps to apply the new process.
Summary overview
The employer funds the shortfall, and the employee repays it in a future pay period.
You set up two new pay codes: one to record the underpayment and one to recover it.
The underpayment code posts the amount as an employer cost. The recovery code is a deduction.
Gross to net, payslips and the Pension Scheme Analysis Report all show the amounts.
The NAERSA submission reports the full employee contribution as a percentage of gross pay. The employer-funded pay code attaches to the employee contribution, not the employer contribution.
How PeopleXD processes a shortfall
Step | What happens |
1. Contribution calculated | PeopleXD calculates the required employee contribution from gross pay. |
2. Net pay used first | PeopleXD takes the employee contribution from the employee's remaining net pay. |
3. Balance funded by employer | PeopleXD records any balance that net pay doesn't cover under the Employee Underpayment pay code. The employer pays this amount. |
4. Recovered later | PeopleXD recovers the amount from the employee in a future pay period under the Employee Recovery pay code. It takes one deduction line, up to the net pay available, rather than spreading the amount across earlier periods. |
Worked example
This example uses sample figures from the training recording.
Item | Amount |
Gross salary | 1,000.00 |
PAYE | 868.00 |
PRSI | 42.00 |
USC | 80.00 |
Net pay remaining after deductions | 10.00 |
Required employee contribution, at 1.5% of gross | 15.00 |
Employee pays from net pay | 10.00 |
Employer-funded underpayment | 5.00 |
Employer contribution, at 1.5% of gross | 15.00 |
Recovered from the employee in a later pay period | 5.00 |
Configuration
To apply the new process, complete the steps below.
The pay code numbers in these steps are the ones used in the year end webinar recording.
Choose codes that suit your own pay code structure.
⚠️Important: Until you populate both pay codes, PeopleXD continues to apply the existing INPA and PAADJ process.
Step 1: Create the Employee Underpayment pay code
Setting | Value | Notes |
Pay code | Choose a deduction code. The recording uses 1249. | Choose a code that doesn't clash with an existing pay code. |
Pay code description | AUTO ENROL IE EE UNDERPAYMENT | Use a clear description, so you can find the code easily on reports. |
Analysis code | Employer Pension | Choose an analysis code with analysis type EN, because the employer funds this amount. The recording uses Employer Pension. |
Value type | Value | Enter the value in the Hours / Days / Units / Value field. |
Multiplier | -1 | The -1 multiplier turns the pay code into a deduction, as shown in the recording. |
Tax and insurance treatment | Non-taxable, non-PRSIable, non-pensionable (EE and ER) | The pay code wizard summary shows this treatment. |
Step 2: Create the Employee Recovery pay code
Setting | Value | Notes |
Pay code | Choose a deduction code. The recording uses 1250. | Choose a code that doesn't clash with an existing pay code. |
Pay code description | AUTO ENROL IE EE RECOVERY | Use a clear description, so you can match each recovery to the original shortfall. |
Type | Deduction | Select Deduction in the pay code wizard. |
Analysis type | Any analysis type except TR | Don't use analysis type TR for the recovery code. |
Tax and insurance treatment | Non-taxable, non-PRSIable, non-pensionable (EE and ER) | The recovery line carries zero pensionable pay, so it doesn't change pensionable pay reporting. |
Step 3: Assign both codes on the Auto Enrolment Parameters screen
On the Auto Enrolment Submissions page, select Auto Enrolment Parameters in the left menu. Enter the values below, then click Save.
Field | What to enter | Notes |
Employee Underpayment Deduction | The Employee Underpayment pay code. The recording uses 1249. | This field is required. |
Employer Recovery | The Employee Recovery pay code. The recording uses 1250. | This field is required. |
Step 4: Map both codes to the general ledger
Review your general ledger matrix to confirm that both new pay codes post correctly.
⚠️Important: Without a mapping, the Messages tab on gross to net shows the message 'No Expense found on GL Matrix for pay code'.
Running payroll and checking the results
Once you set up the new pay codes, run payroll as normal. The changes appear in the following places when an employee has inadequate pay and can't meet their full employee contributions.
Open the Messages tab. The message 'Employee has unpaid auto enrolment pension' on the employee's gross to net confirms that a shortfall has arisen.
Review the employer pension lines. They show the MyFutureFund employer contribution and the Employee Underpayment pay code.
Check the payslip. The MyFutureFund deduction shows the amount paid from net pay, and it includes the employer-paid part of the employee underpayment.
Check later pay periods. The Employee Recovery deduction appears under Deductions.
Review the Pension Scheme Analysis Report. It includes the Auto Enrolment Pension ER, Auto Enrolment Underpayment and Auto Enrolment Recoupment columns.
Generating the NAERSA submission
Generate the submission file as usual. The Auto Enrolment Contribution report shows the full employee and employer amounts for the period, even when the employee's reduced amount was deducted, because NAERSA collects the full amount owed.
You don't report recovered amounts again. NAERSA already collected the full amount in the month the shortfall arose.
Field | What to enter |
Select Auto Enrolment action | Generate submission file |
Submission type | For example, Normal Submission, as used in the recording |
Pay group | Select the pay group to submit. |
Employee | Optional. Select one employee to limit the submission. |
Override payment date / Override cheque pay date | Enter a date only if you need to change the normal date. |
Frequently asked questions
Why does the submission show the full amount when the employer paid the shortfall?
The NAERSA submission calculates contributions as a percentage of gross pay, so it reports the shortfall as the employee's contribution, even though the employer pays it. NAERSA requires this format for file validation. NAERSA receives its money in full from the employer up front, so the shortfall stays between you and the employee.
Are recovered amounts reported again?
No. You report the shortfall in the month it arises. Any recovery takes place between you and the employee only.
When do the new pay codes go live?
You control this. The new process applies once you enter the new pay codes.
What happens if the codes aren't set up yet?
PeopleXD continues to use the existing INPA and PAADJ process until you populate both codes.
Go live checklist
Create the Employee Underpayment pay code with an analysis code of analysis type EN.
Create the Employee Recovery pay code as a deduction, without analysis type TR, and with zero pensionable pay.
Link both codes on the Auto Enrolment Parameters screen.
Map both codes in the general ledger matrix, if applicable.
Run payroll as normal.
Generate the NAERSA submission file as normal.
